|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
RSA30L Diodes ESD protection device (TVS) RSA30L Applications For terminal protection device External dimensions (Unit : mm) Land size figure (Unit : mm) 2.0 2.60.2 4.50.2 0.10.02 0.1 5.00.3 Features 1) Small power mold type. (PMDS) 2) High reliability 2.0 1.20.3 PMDS Construction Silicon epitaxial planar 1.50.2 2.00.2 Structure ROHM : PMDS JEDEC : SOD-106 Manufacture Date Taping specifications(Unit : mm) 2.00.05 4.00.1 1.550.05 1.750.1 0.3 5.50.05 1.55 2.90.1 4.00.1 2.8MAX Absolute maximum ratings (Ta=25C) Param eter P eak puls e (tp=10 x 1000us ) S tand off power Junction tem perature S torage tem perature Sym bol Ppk VRMN Tj Ts tg Lim its 600 25.6 150 -55 to +150 Unit W V Electrical characteristics (Ta=25C) Parameter Breakdown voltage Clam ping voltage Reverse current Symbol VBR VC IR Min. 28.5 Typ. Max. 31.5 41.4 5 Unit V V uA IR=1.0mA Vpp=14.4V VRMN=25.6V Conditions 5.30.1 0.05 9.50.1 120.2 4.2 30 L Rev.B 1/2 RSA30L Diodes Electrical characteristic curves (Ta=25C) 10 10000 Ta=75 1000 REVERSE CURRENT:IR (nA) 100 10 1 0.1 0.01 0.001 Ta=150 Ta=150 Ta=125 10 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(nF) ZENER CURRENT:Iz(mA) 1 Ta=25 Ta=-25 Ta=125 Ta=75 Ta=25 Ta=-25 0.1 1 0.01 0.001 25 26 27 28 29 30 31 32 33 34 0.0001 0 5 10 15 20 25 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 0.1 0 5 10 15 20 25 ZENER VOLTAGE:Vz(V) Vz-Iz CHARACTERISTICS 32 Ta=25 IF=1mA n=30pcs 0.2 0.18 REVERSE CURRENT:IR(nA) 0.16 0.14 0.12 0.1 0.08 0.06 0.04 0.02 27 Vz DISRESION MAP 0 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 1 CAPACITANCE BETWEENTERMINALS:Ct(nF) Ta=25 VR=3.5V n=30pcs 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 IR DISRESION MAP Mounted on epoxy board ZENER VOLTAGE:Vz() 31 AVE:0.884nF Ta=25 f=1MHz VR=0V n=10pcs 30 29 AVE:29.651V 28 AVE:0.0143nA Ct DISRESION MAP 100 TRANSIENT THAERMAL IMPEDANCE:Rth (/W) DYNAMIC IMPEDANCE:Zz() 1000 IM=10mA IF=0.5A 30 Rth(j-a) No break at 30kV 25 ELECTROSTATIC DISCHARGE TEST ESD(KV) 20 15 10 5 0 No break at 30kV 1ms time 100 300us 10 10 Rth(j-c) 1 1 0.1 1 ZENER CURRENT(mA) Zz-Iz CHARACTERISTICS 10 0.1 0.001 TIME:t(s) Rth-t CHARACTERISTICS 0.1 10 1000 C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of RSA30L |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |